Keo xây dựng Soudal T-Rex Bond gốc nước

Soudal T-Rex Bond gốc nước is a fibre reinforced high strength construction adhesive with extremely high initial grab (over 300kg/m²) and high bond strength. Especially suitable for porous materials.

Base	Acrylic polymers
Consistency	Paste
Curing System	Physical drying
Specific Gravity	Ca. 1.30 g/cm³
Temperature resistance	-20°C until +70°C
Open Time (*)	15 min.
Initial grab	At least 300kg/m²
End strength	wood-wood Ca. 22kg/cm²
End strength wood- aluminium	Ca. 16kg/cm²
End strength wood- PVC	Ca. 12kg/cm²
Application Temperature	+5°C until +30°C

T-Rex Bond gốc nước

T-Rex solvent free is a fibre reinforced high strength construction adhesive with extremely high initial grab (over 300kg/m²) and high bond strength. Especially suitable for porous materials.

Tính chất T-Rex Bond gốc nước 

– Fibre reinforced

– Initial grab higher than 300kg/m²

– EC-1R Plus label: very low emission values

– Solvent free

– Suitable for bonding on uneven surfaces

– Direct application onto one substrate

– Excellent adhesion on a wide range of

construction materials both in interior and

exterior applications

Ứng dụng T-Rex Bond gốc nước

– Suitable for immediate and rock solid bonding of many materials such as wood, many

plastics, bricks, stone, tiles, metal to porous surfaces such as concrete, plaster, MDF, OSB,

timber panels, chipboard etc.

– Suitable for the bonding of decorative materials, skirting boards, gypsum panels in vertical, horizontal and overhead applications.

Đóng gói:

Colour: White

Packaging: Cartridge 380gr

Surfaces: 

Type: All substrates except PE,PP and bituminous surfaces. At least one of the substrates should be porous otherwise the curing rate will be significantly slower

State of Surface: The substrates should be dry, clean and free of dust, grease and loose particles.

We recommend a preliminary compatibility test.

Applying the adhesive:

Method: Apply the adhesive by means of a caulking gun onto one surface in beads or dabs (every 15 cm. for panels). Always apply adhesive to the edges and corners of panels. Press the surfaces together immediately and tamp down with a rubber hammer. Support may be required. The bond can be loaded after 24-48 hours.

Application temperature: +5°C to +35°C

Clean: with water if not cured, mechanically if cured

Repair: with same material

Shelf-life:

At least 12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°C. 

Đối với các ứng dụng không đòi hỏi khắt khe về môi trường có thể cân nhắc sản phẩm Soudal T-Rex Bond