Bùi nhùi cuộn cao cấp 3M 07521 A-VFN

THÔNG SỐ KỸ THUẬT BÙI NHÙI 3M 07521

Hạt mài	Nhôm oxit
Ứng dụng	Vệ sinh, chà nhám mặt phẳng & mặt cong, chuẩn bị bề mặt…
Thương hiệu	Scotch-Brite™
Hình dạng	Cuộn
Màu	Đỏ bầm (maroon)
Cách dùng	Chà tay, hoặc với dụng cụ phù hợp
Lĩnh vực	Sản xuất đồ nhựa, ô tô, tàu thuyền, gia công kim loại, MRO, chuẩn bị sơn phủ, sản xuất gỗ và nội thất …
Market	Aerospace, Base Supply, Defense, Facilities Management
Chiều ngang	~200mm
Chiều dài (Metric)	~ 6m
Độ dày	6.35mm (0.25”)
Vật liệu phù hợp	Tất cả kim loại, gỗ cứng, gỗ mềm…
Cấp độ hạt	Very Fine #320-#400

• Có tác dụng gần tương tự bùi nhùi thép nhưng cứng hơn, duy trì hình dạng, ít biến đổi trong quá trình sử dụng, không bời rời, không bị rỉ sét
• So với 3M 7447 thì 07521 mỏng hơn, mềm hơn, tiếp xúc với các vị trí chật hẹp dễ dàng hơn.

Bùi nhùi 3M 07521 – một số đặc tính

• Faster, easier scuffing action – but not coarser
• Use for woodworking, metalworking, synthetic fabrication and maintenance operations
• Available in three color-coded grades, grey fine grade, purple Very Fine and copper Ultra Fine
• Very flexible and conformable for cleaning or fine finishing
• Replaces steel wool to eliminate contamination
• Can be folded, stacked or rolled

3M 07521 Scotch-Brite™ Multi-Flex Sheets  come on a 20 foot perforated roll and works quickly and economically for sealer sanding, denibbing, defuzzing, highlighting and topcoat finishing applications.

Scotch-Brite™ Multi-Flex Sheet is a good replacement for steel wool and eliminates contaminants.
Designed for cleaning and finishing surfaces by hand
The Ultimate Choice for Surface Preparation Hand Finishing
This thin, tough, sharp-cutting non-woven abrasive roll is ultra-flexible and conformable for cleaning or fine finishing. Scotch-Brite Multi-Flex Sheet is a good replacement for steel wool and eliminates contaminants.

The ultra-fine grade silicon carbide abrasive mineral is suitable for cleaning and finishing surfaces by hand in woodworking, metalworking, synthetics fabrication, and maintenance operations.

The three grades of Scotch-Brite™ Multi-Flex Sheet offer more aggressive, but not coarser, cutting and highly conformable finishing.

3M 07521 Most Aggressive — High Cut for Paint Prep and Wood

Our most aggressive cutting grade is purple and is a highly conformable abrasive with high cut for paint preparation and wood finishes without dumping edges. It works great for scuffing new panels, door jambs and under bonnet areas. It is ideal for scuffing prior to primer and paint for proper mechanical adhesion, for tire clean-up and for cleaning grease, oil and rust from engine and other mechanical parts.

3M 07521 Less Aggressive — For Exceptional Finishes on Wood and Metal

Our grey Multi-Flex Sheets are perfect for preparing color coat and simple blending and can be used with 3M™ Prep and Blend Liquid (09308) or degreaser. Use these, as well, for light scuffing of primer and paint.

Least Aggressive — For Cleaning and Fine Finishing
Our least aggressive grade is copper and is used for water based paint systems and critical color blending. Use it for light scouring and with 3M™ Prep and Blend Liquid (09308) or degreaser.